결론은 됩니다.
http://blog.naver.com/PostView.nhn?blogId=boadad&logNo=221019811018&categoryNo=0&parentCategoryNo=0&viewDate=¤tPage=1&postListTopCurrentPage=&from=&userTopListOpen=true&userTopListCount=5&userTopListManageOpen=false&userTopListCurrentPage=1
모니터를 닦으면 컴터가 빨라진다 라는 것 처럼 시스템이 빨라진거 같습니다...ㅋㅋ
아래 bootlog 참고 하세요.
uboot 환경설정이랑 led 색깔을 어떻게 수정해야하는지 몰라 헤매고 있습니다만...
| \/ | __ _ _ ____ _____| | |
| |\/| |/ _` | '__\ \ / / _ \ | |
| | | | (_| | | \ V / __/ | |
|_| |_|\__,_|_| \_/ \___|_|_|
_ _ ____ _
| | | | | __ ) ___ ___ | |_
| | | |___| _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
\___/ |____/ \___/ \___/ \__| ** ix1-spi ** ** uboot_ver:0.0.8 **
** MARVELL BOARD: DB-88F6282A-BP LE
U-Boot 1.1.4 (Oct 28 2011 - 15:17:21) Marvell version: 3.6.1 - EMC
U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006CD5A0
Soc: 88F6282 A1 CPU running @ 1200Mhz L2 running @ 600Mhz
SysClock = 400Mhz , TClock = 200Mhz
DRAM (DDR3) CAS Latency = 6 tRP = 6 tRAS = 15 tRCD=6
DRAM CS[0] base 0x00000000 size 128MB
DRAM Total size 128MB 16bit width
Addresses 8M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (8M - 7M): Done
[1024kB@f8000000] Flash: 1 MB
Marvell Serial ATA Adapter
Integrated Sata device found
[0 0 0]: Enable DMA mode (6)
Device 0 @ 0 0:
Model: ST340014AS Firm: 8.12 Ser#: 5MQ3ESZM
Type: Hard Disk
Supports 48-bit addressing
Capacity: 38146.9 MB = 37.2 GB (78125000 x 512)
CPU : Marvell Feroceon (Rev 1)
Streaming disabled
Write allocate disabled
USB 0: host mode
PEX 0: interface detected no Link.
PEX 1: interface detected no Link.
Net: egiga0 [PRIME]
Hit any key to stop autoboot: 0
Marvell>> setenv bootargs 'console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=spi_flash:0x7e000@0(u-boot),0x1000@0x7f000(env),0x1000@0x7e000(env2) earlyprintk=serial'
Marvell>> setenv bootcmd_usb 'usb reset; run usb_scan; printenv bootargs; ext2load usb $(usb_device) 0x40000 /boot/uImage; ext2load usb $(usb_device) 0x1100000 /boot/uInitrd; bootm 0x40000 0x1100000'
Marvell>> run bootcmd_usb
(Re)start USB...
USB: scanning bus for devices... 2 USB Device(s) found
Waiting for storage device(s) to settle before scanning...
1 Storage Device(s) found
bootargs=console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=spi_flash:0x7e000@0(u-boot),0x1000@0x7f000(env),0x1000@0x7e000(env2) earlyprintk=serial
....
................................................................................................................................................................................................................................................................................................................
3167987 bytes read
....
.........................................................................................................................................................................................................................................................................................................................................................................................................................
..............................................................................................................................................................................................................................................................................................
7179935 bytes read
## Booting image at 00040000 ...
Image Name: Linux-4.4.0-kirkwood-tld-1
Created: 2017-06-01 10:40:30 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3167923 Bytes = 3 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
OK
## Loading Ramdisk Image at 01100000 ...
Image Name: initramfs-4.4.0-kirkwood-tld-1
Created: 2016-02-19 7:33:04 UTC
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 7179871 Bytes = 6.8 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Starting kernel ...
[ 1.389187] console [ttyS0] enabled
[ 1.396286] bootconsole [earlycon0] disabled
[ 1.406827] m25p80 spi0.0: mx25l8005 (1024 Kbytes)
[ 1.417724] libphy: Fixed MDIO Bus: probed
[ 1.422288] libphy: orion_mdio_bus: probed
[ 1.430977] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 1.438938] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:d0:b8:14:0b:8a
[ 1.447946] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.454588] ehci-pci: EHCI PCI platform driver
[ 1.459124] ehci-orion: EHCI orion driver
[ 1.463371] orion-ehci f1050000.ehci: EHCI Host Controller
[ 1.468909] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[ 1.476813] orion-ehci f1050000.ehci: irq 31, io mem 0xf1050000
[ 1.500156] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[ 1.506414] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.513260] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.520534] usb usb1: Product: EHCI Host Controller
[ 1.525434] usb usb1: Manufacturer: Linux 4.4.0-kirkwood-tld-1 ehci_hcd
[ 1.532095] usb usb1: SerialNumber: f1050000.ehci
[ 1.537544] hub 1-0:1.0: USB hub found
[ 1.541387] hub 1-0:1.0: 1 port detected
[ 1.546295] mousedev: PS/2 mouse device common for all mice
[ 1.552590] rtc-mv f1010300.rtc: rtc core: registered f1010300.rtc as rtc0
[ 1.559666] i2c /dev entries driver
[ 1.565671] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.571540] drop_monitor: Initializing network drop monitor service
[ 1.578088] NET: Registered protocol family 17
[ 1.582844] Key type dns_resolver registered
[ 1.587947] registered taskstats version 1
[ 1.592136] Loading compiled-in X.509 certificates
[ 1.597007] zswap: loaded using pool lzo/zbud
[ 1.609517] Key type encrypted registered
[ 1.614179] rtc-mv f1010300.rtc: setting system clock to 2017-06-01 21:54:06 UTC (1496354046)
[ 1.625291] Freeing unused kernel memory: 296K (c07d8000 - c0822000)
Loading, please wait...
[ 1.697775] systemd-udevd[81]: starting version 215
[ 1.712179] random: systemd-udevd urandom read with 2 bits of entropy available
[ 1.860259] usb 1-1: new high-speed USB device number 2 using orion-ehci
[ 1.882570] SCSI subsystem initialized
[ 1.937582] sata_mv f1080000.sata: slots 32 ports 2
[ 1.980284] scsi host0: sata_mv
[ 1.995728] scsi host1: sata_mv
[ 1.999253] ata1: SATA max UDMA/133 irq 34
[ 2.025214] usb 1-1: New USB device found, idVendor=05e3, idProduct=0723
[ 2.033425] ata2: SATA max UDMA/133 irq 34
[ 2.037655] usb 1-1: New USB device strings: Mfr=3, Product=4, SerialNumber=2
[ 2.050938] usb 1-1: Product: USB Storage
[ 2.054975] usb 1-1: Manufacturer: Generic
[ 2.059197] usb 1-1: SerialNumber: 000000009451
[ 2.087783] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 2.095279] usb-storage 1-1:1.0: Quirks match for vid 05e3 pid 0723: 8000
[ 2.102348] scsi host2: usb-storage 1-1:1.0
[ 2.108229] usbcore: registered new interface driver usb-storage
[ 2.117203] usbcore: registered new interface driver uas
[ 2.540170] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl F300)
[ 2.580199] ata1.00: ATA-6: ST340014AS, 8.12, max UDMA/133
[ 2.585709] ata1.00: 78125000 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.650201] ata1.00: configured for UDMA/133
[ 2.670588] scsi 0:0:0:0: Direct-Access ATA ST340014AS 8.12 PQ: 0 ANSI: 5
[ 3.030161] ata2: SATA link down (SStatus 0 SControl F300)
[ 3.062541] sd 0:0:0:0: [sda] 78125000 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 3.072835] sd 0:0:0:0: [sda] Write Protect is off
[ 3.077770] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.099282] sda: sda1
[ 3.103715] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.109396] scsi 2:0:0:0: Direct-Access Generic STORAGE DEVICE 9451 PQ: 0 ANSI: 0
[ 3.125483] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.131373] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 3.249369] sd 2:0:0:0: [sdb] 7959552 512-byte logical blocks: (4.07 GB/3.79 GiB)
[ 3.257975] sd 2:0:0:0: [sdb] Write Protect is off
[ 3.263847] sd 2:0:0:0: [sdb] No Caching mode page found
[ 3.269195] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 3.282078] sdb: sdb1
[ 3.293893] sd 2:0:0:0: [sdb] Attached SCSI removable disk
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Checking root file system ... fsck from util-linux 2.25.2
rootfs: clean, 14520/248992 files, 151430/994560 blocks
done.
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.88 booting
[info] Using makefile-style concurrent boot in runlevel S.
[....] Starting the hotplug events dispatcher: udevd[ 15.141052] systemd-udevd[298]: starting version 215
. ok
[....] Synthesizing the initial hotplug events...[ 15.406703] input: gpio-keys as /devices/platform/gpio-keys/input/input0
done.
[....] Waiting for /dev to be fully populated...[ 15.611353] adt7475 0-002e: ADT7473 device, revision 2
[ 15.621358] orion_wdt: Initial timeout 21 sec
[ 15.628585] random: nonblocking pool is initialized
[ 15.667862] adt7475 0-002e: Bypassing attenuators on: in1
[ 15.688997] marvell-cesa: probe of f1030000.crypto failed with error -524
done.
[ ok ] Activating swap...done.
[....] Checking root file system...fsck from util-linux 2.25.2
rootfs: clean, 14520/248992 files, 151430/994560 blocks
done.
[ ok ] Activating lvm and md swap...done.
[....] Checking file systems...fsck from util-linux 2.25.2
done.
[ ok ] Loading kernel modules...done.
[ ok ] Cleaning up temporary files... /tmp.
[ ok ] Mounting local filesystems...done.
[ ok ] Activating swapfile swap...done.
[ ok ] Cleaning up temporary files....
[ ok ] Setting kernel variables ...done.
[ 19.870801] NET: Registered protocol family 10
[ 19.971615] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.3.1
Copyright 2004-2014 Internet Systems Consortium.
All rights reserved.
For info, please visit <a href="https://s.ppomppu1.co.kr?idno=nas_26665&target=https://www.isc.org/software/dhcp/" rel="nofollow">https://www.isc.org/software/dhcp/</a>
Listening on LPF/eth0/00:d0:b8:14:0b:8a
Sending on LPF/eth0/00:d0:b8:14:0b:8a
Sending on Socket/fallback
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8
[ 23.533309] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled
[ 23.543229] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12
DHCPREQUEST on eth0 to 255.255.255.255 port 67
DHCPOFFER from 192.168.2.1
DHCPACK from 192.168.2.1
bound to 192.168.2.101 -- renewal in 42758 seconds.
done.
[ ok ] Starting rpcbind daemon....
[ ok ] Starting NFS common utilities: statd idmapd.
[ ok ] Cleaning up temporary files....
INIT: Entering runlevel: 2
[info] Using makefile-style concurrent boot in runlevel 2.
[....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd...
1243 (syslogd)
. ok
[ ok ] Starting NFS common utilities: statd idmapd.
[warn] Not starting NFS kernel daemon: no exports. ... (warning).
[ ok ] Starting system message bus: dbus.
[ ok ] Starting NTP server: ntpd.
[ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon.
[....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd...
1241 (klogd)
. ok
[ ok ] Starting OpenBSD Secure Shell server: sshd.
Debian GNU/Linux 8 debian ttyS0
debian login: | |
|
등록안내
